PRODUCT PHOTO FOR REFERENCE ONLY. THE ACTUAL LOOK MIGHT LOOK SLIGHTLY DIFFERENT DUE TO THE HUB AND THE SIZE OF THE RIM.
JHR JC MESH 12x5 Rear Rim. 3+2 offset, 4x140mm and 4x144mm bolt pattern is perfect for Honda Ruckus using the Kymco, Sym, or Daytona rear hubs! Machined from Douglas Wheel Technologies (DWT) solid dish blanks, with chamfer efforts on both sides of the rims.
NOTES:
- Does not include hub. You would need to purchase the appropriate hubs depending on your application.
- Please be aware that the chamfer process is carried out to the best of JHR's ability, but due to the DWT blanks not being perfectly flat at the center and exhibiting a bulge where the halves are joined, variations in the depth and visibility of the chamfer may occur. One side might have more chamfer than the other and some area might not have any chamfer due to the thickness variations from the spun process.
Specs:
- Design: JC MESH
- Diameter: 12"
- Width: 5"
- PCD Bolt Pattern: 4x140mm and 4x144mm
- Finish: Raw aluminum with minor color blend polish from DWT (not mirror or show quality polish)
SPUN ALUMINUM RIM NOTE:
Douglas Wheel Technologies (DWT) rims are made from spun aluminum, which is originally designed to be used with off-road vehicles, such as ATV and UTV. All Douglas rims have a slight wobble or run-out since they are designed for off-road vehicles that are used on the sands. It's industry standard for spun rims to have some run-outs or up and down movement. The llip edge may contain some slight blems or imperfections as DWT does not package the rims with enough protection during shipping, therefore it's DWT standard to have some blems/imperfections on the lip edge. DWT made their wheels with the intention of them being used hard in the dirt and sand. If you want high quality rims, please look into Chimera Engineering Wheels (CHW).
